4152牌號UHMWPE高分子聚乙烯護舷貼面板，港口碼頭護舷專用材質貼面板。

耐腐蝕、吸水率低、抗沖擊護舷貼面板。

- 不腐爛，裂開或破裂；100％可回收- 

   碼頭用可回收和防腐的船用護舷板，Recyclable and anti-rot marine fender facing pads for dock港口用可回收和防腐的船用護舷板 ，材質：高分子聚乙烯UHMWPE;Shandong Ningjin Davos Chemical Co.,Ltd寧津達沃斯工程塑料有限公司定制。


    用于碼頭的可回收和防腐的船用護舷板護墊低摩擦系數uhmwpe 1000工程護舷板
    Recyclable and anti-rot arine fender facing pads for dock Low Coefficient of Friction uhmwpe 1000 engineering fender pads


    用于碼頭的可回收且防腐的船用護舷板襯墊低摩擦系數uhmwpe 1000工程護舷板可以避免船舶與碼頭之間的碰撞損壞。由于具有很高的抗沖擊性能，用于碼頭的可回收和防腐的船用護舷板非常低的摩擦系數uhmwpe 1000工程護舷板代替了傳統的鋼制護舷板，在國內外港口和碼頭中廣泛使用。   
1.耐-269℃的
低溫2.吸水率＜0.01％
3.耐腐蝕性
高4.耐沖擊性
5.抗紫外線，使用壽命長
    Recyclable and anti-rot marine fender facing pads for dock Low Coefficient of Friction uhmwpe 1000 engineering fender pads could avoid the impact damage between ships and dock. Because of the high impact resistance performance, Recyclable and anti-rot marine fender facing pads for dock Very Low Coefficient of Friction uhmwpe 1000 engineering fender pads instead of the traditional steel ones is widely used in ports and docks at home and abroad.
1. Low-temperature resistance In -269℃
2. Low water absorption ＜0.01%
3. High Corrosion resistance 
4. High impact resistance
5. UV resistance and long service life




UHMWPE的優勢和主要特點
-所有聚合物中zui高的耐磨性，是鋼的六倍-耐候性和抗老化性
-自潤滑，很低的摩擦系數
- 優異的耐化學腐蝕性能
- 優異的抗沖擊性，噪音
-吸收，振動吸收
-溫度范圍：-2600C?+ 800C; 很好的耐寒性，即使在-1800C下也不會變脆。
-高抗拉強度
–無毒無味
–耐紫外線–阻燃；吸水率相對較低
- 優異的電性能
- 良好的抗環境應力開裂性能，是普通PE的200倍-無附著力
-重量輕且易于處理和固定 - 成本效益; 降低能耗
-不會腐爛，裂開或破裂; 100％可回收
- 適用于工業物料搬運應用的耐磨自潤滑襯里材料
- 易于再加工
PE Advantages & Key Features
--Highest abrasion resistance of any polymer, 6 times more wear resistant than steel
--Anti-Weather & Anti-Aging
--Self-lubricating, Very low coefficient of friction
--Excellent chemical & corrosion resistant
--superior impact resistant, Noise- absorption, Vibration-absorption 
--Temperature range: -2600C ~ +800C; Very high resistance to cold, doesn't become fragile even under -1800C 
--High tensile Strength
--Non-Toxic and smell
--UV resistance
--Flame Retardant; Relatively low in water absorption
--Excellent electrical properties
--Good performance in resisting environment stress crack, 200 times of ordinary PE
--No adhesion 
--Light weight and easier to handle and fix
--Cost efficient; Resulting in low energy consumption
--Does not rot, split or crack; 100% recyclable 
--Great liner material for industrial material handling applications
--Easy Reprocessed




   高分子聚乙烯壓制模具尺寸Machine Parts Mould size：
1000×3000× (6 - 200 )   mm
1200×1200× (6 - 300)    mm
1200×4000× ( 6 - 80 )    mm
1250×3100×  (6 - 200)   mm
2200×10000×(10-130)   mm
   UHMWPE板材可以根據客戶要求進行再加工UHMWPE Sheets could be reprocess under customer's requirements.